Gear Lot 280CX

1) CNC BEVEL GEAR CUTTER WITH CHAMFER/DEBURRING LOADER :

Specifications : (Travel / Speed ) :

X - Horizontal, Work Slide : 25-334 mm / 13m/min,

Y - Vertical Travel : +/-175mm / 13m/min,

Z - Cutter Slide Travel : 125-600 mm / 13m/min,

B - Root Angle : -5 Deg./+90 Deg. / 50 Deg/Sec,

Capacity : (Face Milling / Face Hobbing) 

Extreme Ratio : 200:1 / 200:1,

Full Depth, Maximum : 20 mm / 20 mm,

Face Width, Maximum : 58 mm / 58 mm,

Range of Tooth Numbers : 1-200 Inclusive / 1-200 Inclusive,

Maximum Gear Pitch Diameter : 280 mm / 280 mm,

Maximum Cutter Size : 9" / 105 mm radius,

Normal Module Range : 2-13 module / 2-13 module,

Motor Drives : Speed / Continuous Torque Power,

A-Work Spindle (Digital Direct Drive) : 1200 rpm / 271 Nm,

C-Cutter Spindle (Digital Direct Drive) : 1200 rpm / 542 Nm,

Electrical Equipment :

Coolant/Hydraulic : AC Induction / 2.2kW,

Chip Elevator : AC Induction / .4kW.

Equipped with : 

Fanuc 30i Control,

Cutter Clamping,

Cutter Handling Bail For PENTAC,

Auxiliary Chamfering and Loader,

Part Probing : Electronic Contacting Gauge,

Chip Removal System For Dry Cutting,

Emergency Withdraw,

Electrics and Hydraulics to 480V/60Hz,

2) 2016 GLEASON PHOENIX 280G CNC BEVEL GEAR GRINDER :

Specification : 

 X-Horizontal (work slide): 25-334mm, 1-13.1"

 Y-Vertical Travel: -/+ 175mm, -/+ 7"

 Z-Wheel Slide Travel: 125-600mm, 5-23"

 B-Root Angle: -5 to +90deg

 WORKPIECE CAPACITY:

 Max. Full Depth: 20mm, .775"

 Max. Face Width: 58mm, 2.3"

 Max. Gear Pitch Diameter: 280mm, 11"

 Min/Max. Wheel Size: 51/230mm, 2.0/9"

 Max. Module: 10mm, 2.54 DP

 Min. Number of Teeth: 1

 ELECTRICAL EQUIPMENT:

 X-Horizontal (work slide): 2,000 rpm

 Y-Vertical Travel: 2,000 rpm

 Z-Wheel Slide Travel: 2,000 rpm

 B-Root Angle: 2,000 rpm

 A-Work Spindle: 900 rpm

 C-Wheel Spindle: 8,000 rpm

 D-Dresser Spindle: 10,000 rpm

 W-Eccentric Spindle: 2,800 rpm

Equipped with : 

 Fanuc 30i CNC Control

 Grinding Spindle W/Eccentric Motion

 Machine Arranged W/Grinding From Solid

 Machine Arranged W/Arbor Run-Out Compensation

 Wheel Mounting Equipment

 Emergency Withdraw

 Machine Axis Gauging

 Roughing Dresser Roller

 Finishing Dresser Roller

 Coolant Filter

 Cleanable Belt 480V/60Hz

 Electrics and Hydraulics to 480V/60Hz

3) 2016 GLEASON 360AT UNIVERSAL GEAR TESTER :

Equipped with : 

 Fanuc Control

 Machine Configured For Angular Bevel & Cylindrical

 Pivot Clamping For Swinging Gear Head Position

 Gear Spindle Motor Torque Extended Capacity

 Side Outboard Engagement By Tailstock Spindle

 Gear Spindle Drivetrain Configuration

 Nick & Burr Detection System - Enhanced Double Flank Method

 Electrics 480V/60Hz

 SPECIFICATIONS:

 Maximum Workpiece Diameter: 360 mm

 Shaft Angle: 65 - 185 Degrees

 Offset Range: +/- 152 mm

Equipped with : 

 Fanuc Control

 Machine Configured For Angular Bevel & Cylindrical

 Pivot Clamping For Swinging Gear Head Position

 Gear Spindle Motor Torque Extended Capacity

 Side Outboard Engagement By Tailstock Spindle

 Gear Spindle Drivetrain Configuration

 Nick & Burr Detection System - Enhanced Double Flank Method

 Electrics 480V/60Hz

4) 2016 GLEASON PHOENIX CB CUTTER BUILD MACHINE

CAPABILITY:

Face Mill/Face Hob Cutter Heads

PENTAC

TRIAC

CYCLOCUT

RSR

Equipped with : 

Nose Adapters

Summary Storage 200 Cutters

Floppy Drive

USB Port

Work Light