Press Sheet Stamping Mechanical Fukui MTE1100

Transfer Press

Press Driving : Top drive / crankless

No of point : 2 Points

Transfer device : 2 Dimensional working

Capacity : 1100 tons,

Power ability Location / lower point : 13 mm,

Length of Stroke : 300 mm,

Die height from the top surface of bolster to the bottom surface of slide : 710 mm,

Slide adjust : 50 mm,

No of stroke : In case of 2 Dimensional working , 20-30 spm,

Effective working volume : No. of stroke : 20. 25. 30,

Effective working Volume : 20. 20.7 21.0

No of station : 13

Interval of station : 300 mm,

Slide size / Left to Right x Front to Back : 3900 x 1100 mm,

Bolster size : 4000 x 1100 mm / thickness 280 mm,

Permisible loading weight : 200 Ton ( Blanking station 35 ton )

Maximum part of height : 80 mm

Balancer capacity : In case of air pressure 8 kgf/sq.cm, Adapter' plate weight+Top side w't : 7 ton.

-Blanking Station :

Pressing capacity : 250 tons

Power ability Location / lower point : 13 mm,

Length of stroke : 100 mm,

Die height from the top surface of bolster to the bottom surface of slide : 320 mm,

Adjustment of slide : 25 mm,

No of stroke : 25~30 spm,

Size of slide : 600 x 1600 mm,

Size of bolster : 600 x 1600 mm,

Blanking Size : Dia 85 ~ 170,

Balancer capacity : In case of air pressure 8 kgf/sq.cm, Adapter' plate weight+Top side w't : 7 ton.

13 stages for production automobile's motor case.

Technical manuals are Available.