Radial Forging Line GFM SX-13

Max dia : 130 mm,

Dies/Rolls : Four (4),

Motor : 280 kW,

Force of each hammer : 160 tons,

Total Forge Tonnage : 640 tons,

Hammer length : 270 mm,

Max Forging bar diameter : 130 mm,

Max Squares with rounded corners : 115 mm,

Min Squares with rounded corners : 24 mm,

Max width of forged rectangles : 110 mm,

Max workpiece length : 4000 mm,

Total installed power : 280 kW.

Force per hammer : 1600 kN,

Number of strokes per minute : approx 620,

Length of the hammer : 270 mm,

Hammer adjustment : max. 80 mm,

Max. starting size : round 130 mm or square 115 mm,

Min. finish size : round 26 mm or square 24 mm,

Max. thickness/width ratio : 1 : 5.5,

Max. product width : 110 mm,

Max. piece length : 4000 mm,

Max. diam. in the Manipulator : 130 mm,

Manipulator torque force : 3 kN,

Spindle ID : 100 mm,

Max. reduction in one pass : 25 mm,

Water consumption : 25m3/hour at 30°C (6,604 gal/hour at 86°F) and

15 m3/hour at 20°C (3,963 gal/hour at 68°F),

Compressed air pressure : 4.5 bar,

Bar Loader: max. load capacity : 300 kg,

Max. work piece length : 2100 mm,

Min. work piece length : 500 mm,

Max. work piece length : 4000 mm,

Min. work piece length : 500 mm,

Manipulator high travel speed : 500 mm/sec.

Manipulator feeding speed : 15 - 200 mm/sec. (2.95 - 39.4 fpm) infinitely variable,

Power supply : 380 V / 50 Hz,

Total installed power : 280 kW / 540 A,

Operating voltage : 380 V / 50 Hz,

Control voltage : 220 V / 50 Hz,

Lights voltage : 220 V / 50 Hz,

The line is complete with :

- Forging Machine SX-13,

- 2 (two) Manipulators with Beds,

- Loading / Unloading Devices,

- Electrics with Controls and Pulpits,

- Hydraulics and Pneumatics,

- Available spares and tooling,

- Available documentation,

Current Production Program :

Rounds 26 - 100 mm,

Square 24 - 80 mm,

Flat : max 110 mm wide x min. 12 mm thick,

Hex : 55 - 95 mm (2.17" - 3.74") AF.