Hot Forging Line

Price

Contact us for price

orCall +91 9920651051

Specifications

ManufacturerHuta Zygmunt,Polish
ModelMPM6300B
ConditionUsed
Stock NumberMA1553
Item conditionGood working condition
Capacity tons2.5
1) hammer forging penumatic capacity2.5
Energy of blow70 kJ
Weight of falling part2496 kg
Max weight of upper die800 kgs
Anvil block weight w/o die holder47.5 tons
Weight of hammer with anvil block72.5 tons
Approximate forging weight1.5-7 kg
Steam of incoming air pressure0.5-0.7 MPa
Average steam consumption970 kg/h
Average cold air consumption24 m3/min
Average hot air consumption18 m3/min
Number of blows per minute100 1/min
Width of hammer1730 mm
Total height of hammer5145 mm
Height of hammer above floor4100 mm
Min height of die partition above780 mm
Min height of the die (without tail)300 mm
Guideway spacing636 mm
Length of die seat650 mm
Length of the seat in the die holder900 mm
Max width of working area650 mm
Max tup stroke850 mm. With 2) Trimming Press Make -Wilkin & Micheal
Capacity250

Description

1) Hammer Forging Penumatic

Capacity : 2.5 tons,

Energy of blow : 70 kJ,

Weight of falling part : 2496 kg,

Max weight of upper die : 800 kgs,

Anvil block weight w/o die holder : 47.5 tons,

Weight of hammer with anvil block : 72.5 tons,

Approximate forging weight : 1.5-7 kg,

Steam of incoming air pressure : 0.5-0.7 MPa,

Average Steam consumption : 970 kg/h,

Average cold air consumption : 24 m3/min,

Average hot air consumption : 18 m3/min,

Number of blows per minute : 100 1/min,

Overall dimension :

Length of hammer : 3100 mm,

Width of hammer : 1730 mm,

Total height of hammer : 5145 mm,

Height of hammer above floor : 4100 mm,

Min height of die partition above : 780 mm,

Min height of the die (without tail) : 300 mm,

Guideway spacing : 636 mm,

Length of die seat : 650 mm,

Length of the seat in the die holder : 900 mm,

Max width of working area : 650 mm,

Max tup stroke : 850 mm.



With

2) Trimming Press

Make -Wilkin & Micheal,

Capacity : 250 ton,


3) Atlas Capco Compressor 90 CFM GA VSD,

4) ELGI 185 Compressor only 10 months old,

5) Billet Heater Ferrotherm