1500 tons Press Trimming Sato SLP-1500-140-130

Capacity : 1500 tons,

Stroke : 350 mm,

Stroke per minutes : 12 spm,

Speed : 15 - 25 mm,

Die height : 850 mm,

Slide adjust : 150 mm,

Slide dimension (RL x FB) : 1400 x 1300 mm,

Bolster dimension (RL x FB) : 1400 x 1300 mm,

Die cushion capacity : 74 tons,

Slide knockout ability : 40 tons.

Operating air pressure : 5 kgf/cm2,

Main electric motor : DC 150 kW,

Feedstroke : 1000 mm,

Clamp stroke : 1750 mm on each side,

Feed bar inner width dimension : 660 mm when clamped,

Feed bar top surface height : 555 mm above the bolster ,

Drive system : top drive crankless,

Upright side opening : 1550 mm front and rear,

Left-right dimension between uprights : 1800 mm,

Working surface height : 700 mm from the floor to the top of the bolster,

Dice Cushion :

Number of units: 1

Type: Pneumatic,

Capacity: 74 tons,

Stroke length: Effective 180 mm,

Pad dimensions: 750 x 750 mm,

Sub-cushion :

Number of units: 1

Type: Pneumatic

Capacity: 1 tons,

Stroke length: 180 mm,

Pad dimensions: 750 x 750 mm,

Slide Knockout :

Base: 1

Type: Pneumatic

Capacity: 40 tonf

Stroke Length: 100 mm

Daikranpa:

Upper clamp type: Mobile hydraulic automatic clamp;

Capacity x Quantity: 1.6 tonf x 4 units

Lower clamp

type: Mobile hydraulic automatic clamp;

Capacity x Quantity: 16 tonf x 4 units

Die lifter :

Type: Hydraulic, bolster-embedded

Capacity x Number: 5 tonf x 2 rows

Bolster rail length: 1200 mm

Die Set Table:

Type: Press with fixed rear panel

Capacity x Quantity: 5 tonf x 2 rows

Table Length: 800 mm

Micro-inching :

Type: Main motor low-speed rotation type (no load)

Stroke rate: 3 spm

Flywheel brake :

Type: Dynamic braking by main motor

Stopping time: Approximately 60 seconds

Automation equipment :

Electrical control circuit: 2-circuit,

4-way outlet solenoid valve: 3/8B × 2

Safety shutter : Format: Front and rear electric lift type 1 set.